Available for emergency plumbing, 24/7!


Don’t Have a Plunger? 2 Ways to Unclog Your Toilet Without a Plunger

When you don’t have a plunger on hand, dealing with a clogged toilet can be a messy and frustrating situation. However, there are alternative methods to unclog your toilet without a plunger. In this guide, we’ll look at two simple yet effective ways to get your toilet running smoothly again, even of you don’t have the standard tool for the job.

Baking Soda and Vinegar

The combination of baking soda and vinegar is a time-tested and effective solution to unclog your toilet without a plunger. Here are the steps to follow:

  1. Check the Water Level: Before you start the unclogging process, ensure that the water level in the toilet bowl is about halfway full. If it’s too high, scoop out some of the water with a small container (wear rubber gloves). If it’s too low, top it off with water until it’s about midway.
  2. Add Baking Soda: To the toilet bowl, add one cup of baking soda.
  3. Slowly Add Vinegar: Carefully pour one cup of vinegar into the bowl. Be cautious not to pour it too fast, as the chemical reaction can create a mess on your bathroom floor. Adjust the vinegar amount if needed.
  4. Wait for 20 Minutes: Allow the mixture of baking soda and vinegar to sit in the toilet bowl for approximately 20 minutes.
  5. Check for Success: If the clog is successfully broken up, you’ll notice the water level receding, and you may see bubbles as the pressure changes. These signs indicate it’s safe to flush the toilet.

Toilet Snake

If the baking soda and vinegar method doesn’t do the trick, it’s time to try a drain snake or toilet auger.

A toilet snake, also known as a closet snake or toilet auger, is a handy tool designed to reach beyond a toilet’s p-trap to grab or break up the material causing the clog. It has a long, retractable metal cable with a coiled hook on one end and a rubber coating to prevent scratching your toilet bowl.

  1. Gear Up: Put on rubber gloves to protect your hands.
  2. Protect Your Space: Place several old towels around the base of the toilet to prevent any mess from reaching your floor.
  3. Prepare a Bucket: Have an empty bucket nearby to collect any materials you pull out.
  4. Insert the Auger: Place the end of the toilet auger into the toilet bowl.
  5. Turn the Handle: Turn the handle clockwise to push the cable into the drain.
  6. Feel for Resistance: Keep turning the handle until you feel resistance, indicating that you’ve reached the clog.
  7. Retrieve the Clog: Turn the handle counterclockwise to grab the clog and pull it out.
  8. Repeat as Necessary: Continue using the auger until the clog is entirely broken up. Flush the toilet to check if the problem has been resolved.
  9. Dispose of Waste: Dump all the collected waste from the bucket.
  10. Clean Up: Clean the auger and the bucket with very hot water and vinegar or bleach before storing them.

Final Thoughts

Next time you face a toilet clog without a plunger, remember the tips we provided in this comprehensive guide. Plumbing problems don’t stand a chance when you’re equipped with knowledge. But don’t stop here – there’s a world of plumbing solutions waiting for you. Reach out to Confluent Solutions, where expertise and reliability meet, and let us be your go-to resource for all your plumbing needs.

Discover more plumbing solutions with Confluent Solutions and keep your home flowing smoothly!

Call now to talk to a real plumber!