Available for emergency plumbing, 24/7!


5 Frequently Asked Plumbing Questions

Plumbing is an essential system in any home or business. However, unless you are a professional in the industry or at least familiar with the basics, a plumbing system may seem complex. Today, we have compiled a list of 5 frequently asked plumbing questions and their answers to help you better understand common plumbing issues.

Whether you’re dealing with a leaky faucet or a clogged drain, these questions cover a range of topics to provide you with the necessary knowledge for basic plumbing troubleshooting. By addressing these common concerns, we hope to empower you to handle minor plumbing problems on your own and save money on professional repairs. 

#1 Why Is My Drain Clogged?

Truthfully, there are dozens of possible reasons for a drain to become clogged. However, there are a few common ones that stand out more than others: hair, dirt/soap build-up, food waste, small objects, and cat litter.

So, what should you do if your drain clog is due to one of the common 5 listed above? There are a few DIY solutions you can try before you call yourself a plumber out to fix the issue. For starters, if you suspect hair to be the issue, then purchasing a drain snake may be what you need to dislodge the hair. However, if the object responsible for the clog is a small object, you can try using a wet/dry vacuum or tongs to dislodge it.

On the other hand, if you believe that the culprit of your clogged drain is dirt, soap build-up, food waste, or cat litter, a dissolvent is what you will need. You can make an at-home dissolvent using a mixture of baking soda and vinegar. This should help to break down the material causing your slow drainage, which can then be washed fully down the pipes.

#2 How Do I Avoid Frozen Pipes?

Frozen pipes can lead to significant plumbing issues, causing them to burst and potentially flood your property. To prevent this, there are a few steps you can take:

  • Insulation: Ensure that pipes in vulnerable areas, such as attics, basements, and crawl spaces, are properly insulated. This helps in maintaining a consistent temperature around the pipes.
  • Dripping Faucets: Allowing faucets to drip slightly during extremely cold weather can relieve pressure in the pipes, reducing the risk of freezing.
  • Seal Cracks: Seal any gaps or cracks in your home’s exterior that could let frigid air reach your pipes.
  • Disconnect Hoses: Before winter, disconnect and drain outdoor hoses to prevent ice from forming and potentially damaging the connecting pipes.

By taking these precautions, you can significantly lower the chances of your pipes freezing and experiencing subsequent issues.

#3 Why is My Toilet Running?

A running toilet can not only be annoying but also waste a considerable amount of water over time. The issue is often due to a faulty flapper valve or an improperly adjusted float. Here’s what you can do:

  • Give the Handle a Jiggle: Sometimes, after you flush, you may notice that you toilet does not stop running. This can be from a handle being stuck. Just give it a jiggle.
  • Check the Flapper: Lift the toilet tank lid and inspect the flapper. If it’s worn or not sealed properly, it can allow water to leak into the bowl. Replace it if necessary.
  • Inspect the Chain: Ensure that the chain connecting the flush handle to the flapper isn’t too long or too short. An improper chain length can prevent the flapper from sealing correctly.

By addressing these common issues, you can stop your toilet from running and conserve water.

#4 What Temperature Should I Set My Water Heater At?

The ideal water heater temperature setting balances safety, comfort, and energy efficiency. Most experts recommend setting your water heater to 120°F (49°C). This temperature is hot enough to kill harmful bacteria and provide comfortably warm water for your daily needs without scalding you or risking excessive energy consumption.

#5 How Often Should I Have My Plumbing System Inspected?

Regular plumbing inspections are crucial for catching potential issues before they become major problems. It’s a good idea to have a professional plumber inspect your plumbing system at least once a year. This can help identify leaks, corrosion, blockages, or other issues that might be developing behind the scenes. Timely detection can save you from costly repairs and water damage in the long run.

Did We Answer Your Plumbing Questions?

By understanding how to address some of these common issues and plumbing questions, you can maintain a well-functioning plumbing system and avoid unnecessary stress and expenses. As you delve into the world of plumbing know-how, keep in mind that not all challenges can be DIYed. Confluent Solutions is here for those moments when a plumbing problem grows too complex.

If you’re facing a daunting issue, give us a call at (817)-999-7363 or contact us online today. From our Fort Worth, TX hub, we’re ready to provide professional solutions that match your needs. Learn more at https://eclecticplumber.com/ – your partner in plumbing predicaments.

Call now to talk to a real plumber!