Plumbing problems are among the most prevalent household difficulties that, if not addressed swiftly, may cause annoyance and costly damage. While certain plumbing difficulties may necessitate the services of a professional plumber, there are a few typical problems that you may easily resolve with the correct knowledge and gear. You may save money on repair expenses, prevent damage to your house, and ensure that your plumbing system functions efficiently if you learn how to recognize and correct these common plumbing issues.
Today, we will explore the 3 most frequent plumbing problems and offer simple DIY remedies to treat them yourself…and if all else fails, we will share the best professional plumber near you to call for help!
Got Clogged Drains?
Drain clogs are a frequent plumbing problem that may develop in any section of your home, from the kitchen sink to the bathroom shower. A blocked drain usually causes delayed draining, gurgling noises, or water backup and can also result in foul smells.
If you are experiencing a clogged drain, the good news is that there are various DIY drain unclogging methods available, including:
- Using a Plunger: To produce suction, just position the plunger over the drain and apply hard pressure. To remove the obstruction, repeatedly pump the plunger up and down.
- Baking soda and vinegar: These household items can be used to naturally dissolve blockages. Throw a cup of baking soda and a cup of vinegar down the drain. Let the mixture to remain for a few minutes before flushing the drain with hot water.
- Use a drain snake: A drain snake is a versatile instrument that may be used to break open obstructions. To remove the blockage, insert the snake into the drain and spin it.
A dripping faucet is not only inconvenient, but it may also waste a lot of water over time. For reference, a leaky faucet has a persistent trickle or a steady stream of water coming from the spout. You may also observe water at the base of the faucet in some circumstances.
You can repair a leaky faucet by following these steps:
- Turn off the faucet’s water supply.
- Unscrew the packing nut and remove the handle.
- Replace the washer or O-ring with a comparable size and shape.
- Reassemble the faucet and reconnect the water supply.
Note: Most leaks may be stopped, and your faucet restored to working order by replacing worn out washers or O-rings.
Non-Stop Running Toilets?
Another typical plumbing issue that can waste a substantial amount of water and raise your water costs is a running toilet. A defective flapper, which is the rubber seal that lies at the bottom of the tank and controls the flow of water into the bowl, is frequently the cause of running toilets.
You may repair a running toilet by following these steps:
- Switch off the toilet’s water supply.
- Remove the tank lid and examine the flapper. Replace it with a new one of the same size and form if it is worn or broken.
- Adjust the chain that connects the flapper to the handle if it is too loose or too tight.
- Replace the worn-out fill valve with a new one.
- Reconnect the water supply and test the toilet to check it is operating correctly.
What To Do If You Need Help with Your Plumbing
If you end up with a plumbing problem that you are unable to resolve on your own, it is critical that you seek the assistance of a professional plumber. So, who do you call?
Confluent Solutions is committed to assisting homes in our neighborhood with prompt and dependable plumbing services. From broken pipes to water heater repairs, our professional plumbers have the knowledge and skills to handle even the most complicated plumbing difficulties.
When you pick Confluent Solutions for your plumbing requirements, you can be confident that we will deliver honest and transparent service and that we will collaborate with you to discover the best solution for your needs and budget.